Warning: session_start(): open(/var/cpanel/php/sessions/ea-php56/sess_l33m1jitrtdj6qgivpfualel33, O_RDWR) failed: Disk quota exceeded (122) in /home/xwip4jga/public_html/libraries/joomla/session/session.php on line 658

Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at /home/xwip4jga/public_html/libraries/joomla/session/session.php:658) in /home/xwip4jga/public_html/libraries/joomla/session/session.php on line 658
Lehúzó, kinyomó szerszámok
Page 1 of 3
Results 1 - 28 of 80

Pullers, extractors

Descount net price2.002 Ft
Discount gross price2.543 Ft
Tax amount: 541 Ft

Three jaw puller 3-lever bearings,lenght: 3", clamp size: 75 mm

Net price: 3.133 Ft
Gross tax: 3.979 Ft
Tax amount: 846 Ft

Bearing separator puller set, 10-30 mm

Descount net price3.225 Ft
Discount gross price4.096 Ft
Tax amount: 871 Ft

This tool is used to separate the ball joint from the spindle support arm

Descount net price3.685 Ft
Discount gross price4.680 Ft
Tax amount: 995 Ft

Removes objects (bearing, etc.) in narrow place. Thin type 2 jaw gear puller that can be used for many application. Removes objects in narrow place.

Descount net price4.377 Ft
Discount gross price5.559 Ft
Tax amount: 1.182 Ft

Great for separating ball joints, tie rods, and pitman arms.

Net price: 5.303 Ft
Gross tax: 6.735 Ft
Tax amount: 1.432 Ft

Inner Bearing Puller Set, sizes: 75 mm, 100 mm, 150 mm, 3 pcs

Descount net price4.509 Ft
Discount gross price5.726 Ft
Tax amount: 1.217 Ft

Ball Joint Puller Separator Tool, 18mm, 2-Step, max. size 50mm

Net price: 5.310 Ft
Gross tax: 6.744 Ft
Tax amount: 1.434 Ft

Claw for injectors CDI

Net price: 5.339 Ft
Gross tax: 6.781 Ft
Tax amount: 1.442 Ft

Suitable for removing ball bearings for ball bearings, and stabilizers for steering cats and trucks.

Net price: 5.655 Ft
Gross tax: 7.182 Ft
Tax amount: 1.527 Ft

Bearing, seal, bushing puller/installer set, 17pcs, adapter sizes: Ø12/42, 12/40, 12/36, 12/34, 12/30, 12/27, 12/24, 12/22, 8/20, 8/18, 8/17, 8/16, 8/14, 8/12mm

Net price: 5.999 Ft
Gross tax: 7.619 Ft
Tax amount: 1.620 Ft

Double-crooked extractor, for seals

Only for order: 8-10 days
Descount net price5.164 Ft
Discount gross price6.558 Ft
Tax amount: 1.394 Ft

Manual spring compressor, screw length 245mm

Descount net price5.266 Ft
Discount gross price6.688 Ft
Tax amount: 1.422 Ft

Puller kit that can remove most of the parts.

Net price: 6.346 Ft
Gross tax: 8.059 Ft
Tax amount: 1.713 Ft

Can be used for almost any vehicle. Suitable for quick and trouble free replacement of damaged, worn shaft hubs. Made of steel, durable design.

Descount net price6.262 Ft
Discount gross price7.953 Ft
Tax amount: 1.691 Ft

CVJ/CV Joint Removal Tool 95mm Capacity. Quickly removes the CV joint from the drive shaft without damaging the joint,and keeps hands free for releasing retaining circlip. Reduces risk of damage to transmission. Saves on labour time and suitable for most vehicles.

Discount gross price9.520 Ft
Tax amount: 2.024 Ft

Replace bearing races without damaging the race or axle housing on your vehicle. The collars fit most wheel bearing sizes. The set comes organized in a convenient carrying case for transport and storage. Featuring a machined aluminum construction and an anodized finish for extra durability.

Descount net price6.446 Ft
Discount gross price8.186 Ft
Tax amount: 1.740 Ft

Suspension Rear Axle Bush Removal Install Tool: VW: Golf IV, Bora 1.4, 1.6, 1.8, 2.0, 1.9D (01.03), Audi: A3

Net price: 8.370 Ft
Gross tax: 10.630 Ft
Tax amount: 2.260 Ft

For mounting and disassembling the balancing arm.

Net price: 8.997 Ft
Gross tax: 11.426 Ft
Tax amount: 2.429 Ft

Rear ball joint extractor, VW, Audi

Net price: 9.001 Ft
Gross tax: 11.431 Ft
Tax amount: 2.430 Ft

Bearing separator set, capacity 30-50mm, 50-75mm, 2 separators, 1 forcing screw, 4X2 extensions

Descount net price7.664 Ft
Discount gross price9.733 Ft
Tax amount: 2.069 Ft

Suitable for pull out the stucked injectors without dismount the cylinder head. Mercedes 611, 612, 613

Descount net price7.707 Ft
Discount gross price9.788 Ft
Tax amount: 2.081 Ft

Excellent for day-to-day service.

Net price: 10.019 Ft
Gross tax: 12.724 Ft
Tax amount: 2.705 Ft

One Slide Hammer Assemble & Clamp

Descount net price8.775 Ft
Discount gross price11.144 Ft
Tax amount: 2.369 Ft

Separator tools are used with bar puller and legs for a wide variety of pulling jobs.The 5" puller cross-bar with a 6-1/4" forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools.

Descount net price8.841 Ft
Discount gross price11.228 Ft
Tax amount: 2.387 Ft

Inner Bearing Puller Set with Sliding Hammer

Net price: 10.480 Ft
Gross tax: 13.310 Ft
Tax amount: 2.830 Ft

Wheel Hub Puller Set

Descount net price10.406 Ft
Discount gross price13.216 Ft
Tax amount: 2.810 Ft

3-piece ball head mounting kit for easy and quick mounting and removal of ball joints. Thanks to its low profile design, it is also available for narrow spaces and is therefore well suited to most modern vehicles. Three sizes, that are suitable for most vehicles.

Net price: 12.300 Ft
Gross tax: 15.621 Ft
Tax amount: 3.321 Ft

Front suspension bush tool set for VAG: VW, Audi, Seat, Skoda

Page 1 of 3


Nagykőrösi út 121.
district XX.
1202 Budapest


+36 1 720 8468
+36 30 958 6825
+36 20 488 6461


Buying tax excluded

Our partner company in Slovakia has got EU community VAT number, therefore our customers in the European Union can buy products on Net price.

More details: +36 30 958 68 25

1 + 1 year warranty

Warning: Unknown: open(/var/cpanel/php/sessions/ea-php56/sess_l33m1jitrtdj6qgivpfualel33, O_RDWR) failed: Disk quota exceeded (122) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/cpanel/php/sessions/ea-php56) in Unknown on line 0